Gallo Acoustics A’Diva SE Satellite Loudspeaker (Each)
Gallo Acoustics A'Diva SE Satellite Loudspeaker (Each)
5" All-Metal Spherical Enclosure • 3" Ultra-Wide-Dispersion Flat-Diaphragm Driver • Aluminum Honeycomb Sandwich Cone • 80Hz–22kHz On-Wall Response • 4-Ohm Nominal Impedance • Isolation2 Surface Mount Included
High-Performance Spherical Satellite Loudspeaker with Wide-Dispersion Sound
The Gallo Acoustics A'Diva SE Satellite Loudspeaker (Each) is the high-performance version of Gallo’s compact A'Diva design, combining a rigid 5-inch spherical enclosure with a proprietary ultra-wide-dispersion flat-diaphragm transducer. Designed for premium stereo, home theater, television, desktop, and distributed-audio systems, it delivers impressive clarity and spacious imaging without the visual bulk of a conventional loudspeaker.
Its custom 3-inch driver uses an aluminum honeycomb sandwich diaphragm engineered for high rigidity and low moving mass. This construction helps the A'Diva SE reproduce fine detail, fast transients, and extended high frequencies while maintaining consistent dispersion across a broad listening area.
The Gallo Acoustics A'Diva SE Satellite Loudspeaker (Each) reproduces its entire operating range through one driver without a conventional crossover network. The included Isolation2 surface mount supports shelf, cabinet, desktop, or tabletop placement, while optional accessories allow wall, in-ceiling, table-stand, and floor-stand installation.
Highlights & Benefits
- High-Performance A'Diva SE Design — Upgraded driver technology provides greater resolution and high-frequency extension than the standard A'Diva.
- 5" Spherical Enclosure — Delivers substantial performance from a compact cabinet that integrates easily into modern rooms.
- 3" Flat-Diaphragm Driver — Proprietary ultra-wide-dispersion transducer produces clear, spacious, and coherent sound.
- Aluminum Honeycomb Sandwich Cone — Lightweight, rigid construction supports fast transient response and low coloration.
- Extended 22kHz Response — Reproduces fine high-frequency detail and spatial information beyond the standard A'Diva’s published range.
- No Conventional Crossover — A single full-range driver helps preserve consistent phase and dispersion through the operating range.
- Isolation2 Surface Mount Included — Provides stable shelf or tabletop placement while helping maintain acoustic performance.
- Flexible Installation Options — Compatible with optional Gallo wall mounts, in-ceiling mounts, table stands, and floor stands.
Technology & Performance
Ultra-Wide-Dispersion Flat Diaphragm — The proprietary 3-inch driver is engineered to provide broad and consistent coverage, helping the A'Diva SE maintain clear imaging and tonal balance across a wider seating area.
Aluminum Honeycomb Construction — The sandwich diaphragm combines low mass with high rigidity, allowing the driver to react quickly to musical signals while resisting unwanted flexing and breakup.
Spherical Enclosure Architecture — The rigid metal sphere avoids the parallel internal surfaces found in conventional rectangular cabinets. This helps reduce standing waves, diffraction, and cabinet resonance.
Single-Driver Coherence — Because no conventional crossover is used, music and dialogue are reproduced through one driver, reducing phase and integration issues between separate woofers and tweeters.
Flexible System Integration — The Gallo Acoustics A'Diva SE Satellite Loudspeaker (Each) can be used as a left, center, right, surround, height, desktop, or multi-room speaker. For best full-range performance, Gallo recommends pairing it with a compatible powered subwoofer and approximately 100Hz crossover.
FAQ — Gallo Acoustics A'Diva SE
Is this listing for one speaker or a pair?
This listing is for one Gallo Acoustics A'Diva SE Satellite Loudspeaker. Order two speakers to create a conventional stereo pair.
How is the A'Diva SE different from the standard A'Diva?
The A'Diva SE uses an aluminum honeycomb flat-diaphragm driver, has a 4-ohm nominal impedance, extends to 22kHz, and supports higher power handling than the standard A'Diva.
Does the A'Diva SE require an amplifier?
Yes. It is a passive 4-ohm loudspeaker and requires an amplifier or AV receiver that is compatible with 4-ohm speaker loads.
Is a mount included with the speaker?
Yes. Each speaker includes an Isolation2 surface mount for shelf, desktop, cabinet, or tabletop placement. Wall, in-ceiling, table, and floor-stand mounts are sold separately.
Why Buy From Us
- Authorized Gallo Acoustics Dealer
- 5% Reward Points on Every Purchase
- Price Match Guarantee
- Expert Speaker Placement, Home Theater & Installation Support
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Gallo Acoustics A’Diva SE Satellite Loudspeaker (Each)
Gallo Acoustics A’Diva SE Satellite Loudspeaker (Each)
Gallo Acoustics A'Diva SE Satellite Loudspeaker (Each)
5" All-Metal Spherical Enclosure • 3" Ultra-Wide-Dispersion Flat-Diaphragm Driver • Aluminum Honeycomb Sandwich Cone • 80Hz–22kHz On-Wall Response • 4-Ohm Nominal Impedance • Isolation2 Surface Mount Included
High-Performance Spherical Satellite Loudspeaker with Wide-Dispersion Sound
The Gallo Acoustics A'Diva SE Satellite Loudspeaker (Each) is the high-performance version of Gallo’s compact A'Diva design, combining a rigid 5-inch spherical enclosure with a proprietary ultra-wide-dispersion flat-diaphragm transducer. Designed for premium stereo, home theater, television, desktop, and distributed-audio systems, it delivers impressive clarity and spacious imaging without the visual bulk of a conventional loudspeaker.
Its custom 3-inch driver uses an aluminum honeycomb sandwich diaphragm engineered for high rigidity and low moving mass. This construction helps the A'Diva SE reproduce fine detail, fast transients, and extended high frequencies while maintaining consistent dispersion across a broad listening area.
The Gallo Acoustics A'Diva SE Satellite Loudspeaker (Each) reproduces its entire operating range through one driver without a conventional crossover network. The included Isolation2 surface mount supports shelf, cabinet, desktop, or tabletop placement, while optional accessories allow wall, in-ceiling, table-stand, and floor-stand installation.
Highlights & Benefits
- High-Performance A'Diva SE Design — Upgraded driver technology provides greater resolution and high-frequency extension than the standard A'Diva.
- 5" Spherical Enclosure — Delivers substantial performance from a compact cabinet that integrates easily into modern rooms.
- 3" Flat-Diaphragm Driver — Proprietary ultra-wide-dispersion transducer produces clear, spacious, and coherent sound.
- Aluminum Honeycomb Sandwich Cone — Lightweight, rigid construction supports fast transient response and low coloration.
- Extended 22kHz Response — Reproduces fine high-frequency detail and spatial information beyond the standard A'Diva’s published range.
- No Conventional Crossover — A single full-range driver helps preserve consistent phase and dispersion through the operating range.
- Isolation2 Surface Mount Included — Provides stable shelf or tabletop placement while helping maintain acoustic performance.
- Flexible Installation Options — Compatible with optional Gallo wall mounts, in-ceiling mounts, table stands, and floor stands.
Technology & Performance
Ultra-Wide-Dispersion Flat Diaphragm — The proprietary 3-inch driver is engineered to provide broad and consistent coverage, helping the A'Diva SE maintain clear imaging and tonal balance across a wider seating area.
Aluminum Honeycomb Construction — The sandwich diaphragm combines low mass with high rigidity, allowing the driver to react quickly to musical signals while resisting unwanted flexing and breakup.
Spherical Enclosure Architecture — The rigid metal sphere avoids the parallel internal surfaces found in conventional rectangular cabinets. This helps reduce standing waves, diffraction, and cabinet resonance.
Single-Driver Coherence — Because no conventional crossover is used, music and dialogue are reproduced through one driver, reducing phase and integration issues between separate woofers and tweeters.
Flexible System Integration — The Gallo Acoustics A'Diva SE Satellite Loudspeaker (Each) can be used as a left, center, right, surround, height, desktop, or multi-room speaker. For best full-range performance, Gallo recommends pairing it with a compatible powered subwoofer and approximately 100Hz crossover.
FAQ — Gallo Acoustics A'Diva SE
Is this listing for one speaker or a pair?
This listing is for one Gallo Acoustics A'Diva SE Satellite Loudspeaker. Order two speakers to create a conventional stereo pair.
How is the A'Diva SE different from the standard A'Diva?
The A'Diva SE uses an aluminum honeycomb flat-diaphragm driver, has a 4-ohm nominal impedance, extends to 22kHz, and supports higher power handling than the standard A'Diva.
Does the A'Diva SE require an amplifier?
Yes. It is a passive 4-ohm loudspeaker and requires an amplifier or AV receiver that is compatible with 4-ohm speaker loads.
Is a mount included with the speaker?
Yes. Each speaker includes an Isolation2 surface mount for shelf, desktop, cabinet, or tabletop placement. Wall, in-ceiling, table, and floor-stand mounts are sold separately.
Why Buy From Us
- Authorized Gallo Acoustics Dealer
- 5% Reward Points on Every Purchase
- Price Match Guarantee
- Expert Speaker Placement, Home Theater & Installation Support
Original: $470.00
-65%$470.00
$164.50Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Gallo Acoustics A'Diva SE Satellite Loudspeaker (Each)
5" All-Metal Spherical Enclosure • 3" Ultra-Wide-Dispersion Flat-Diaphragm Driver • Aluminum Honeycomb Sandwich Cone • 80Hz–22kHz On-Wall Response • 4-Ohm Nominal Impedance • Isolation2 Surface Mount Included
High-Performance Spherical Satellite Loudspeaker with Wide-Dispersion Sound
The Gallo Acoustics A'Diva SE Satellite Loudspeaker (Each) is the high-performance version of Gallo’s compact A'Diva design, combining a rigid 5-inch spherical enclosure with a proprietary ultra-wide-dispersion flat-diaphragm transducer. Designed for premium stereo, home theater, television, desktop, and distributed-audio systems, it delivers impressive clarity and spacious imaging without the visual bulk of a conventional loudspeaker.
Its custom 3-inch driver uses an aluminum honeycomb sandwich diaphragm engineered for high rigidity and low moving mass. This construction helps the A'Diva SE reproduce fine detail, fast transients, and extended high frequencies while maintaining consistent dispersion across a broad listening area.
The Gallo Acoustics A'Diva SE Satellite Loudspeaker (Each) reproduces its entire operating range through one driver without a conventional crossover network. The included Isolation2 surface mount supports shelf, cabinet, desktop, or tabletop placement, while optional accessories allow wall, in-ceiling, table-stand, and floor-stand installation.
Highlights & Benefits
- High-Performance A'Diva SE Design — Upgraded driver technology provides greater resolution and high-frequency extension than the standard A'Diva.
- 5" Spherical Enclosure — Delivers substantial performance from a compact cabinet that integrates easily into modern rooms.
- 3" Flat-Diaphragm Driver — Proprietary ultra-wide-dispersion transducer produces clear, spacious, and coherent sound.
- Aluminum Honeycomb Sandwich Cone — Lightweight, rigid construction supports fast transient response and low coloration.
- Extended 22kHz Response — Reproduces fine high-frequency detail and spatial information beyond the standard A'Diva’s published range.
- No Conventional Crossover — A single full-range driver helps preserve consistent phase and dispersion through the operating range.
- Isolation2 Surface Mount Included — Provides stable shelf or tabletop placement while helping maintain acoustic performance.
- Flexible Installation Options — Compatible with optional Gallo wall mounts, in-ceiling mounts, table stands, and floor stands.
Technology & Performance
Ultra-Wide-Dispersion Flat Diaphragm — The proprietary 3-inch driver is engineered to provide broad and consistent coverage, helping the A'Diva SE maintain clear imaging and tonal balance across a wider seating area.
Aluminum Honeycomb Construction — The sandwich diaphragm combines low mass with high rigidity, allowing the driver to react quickly to musical signals while resisting unwanted flexing and breakup.
Spherical Enclosure Architecture — The rigid metal sphere avoids the parallel internal surfaces found in conventional rectangular cabinets. This helps reduce standing waves, diffraction, and cabinet resonance.
Single-Driver Coherence — Because no conventional crossover is used, music and dialogue are reproduced through one driver, reducing phase and integration issues between separate woofers and tweeters.
Flexible System Integration — The Gallo Acoustics A'Diva SE Satellite Loudspeaker (Each) can be used as a left, center, right, surround, height, desktop, or multi-room speaker. For best full-range performance, Gallo recommends pairing it with a compatible powered subwoofer and approximately 100Hz crossover.
FAQ — Gallo Acoustics A'Diva SE
Is this listing for one speaker or a pair?
This listing is for one Gallo Acoustics A'Diva SE Satellite Loudspeaker. Order two speakers to create a conventional stereo pair.
How is the A'Diva SE different from the standard A'Diva?
The A'Diva SE uses an aluminum honeycomb flat-diaphragm driver, has a 4-ohm nominal impedance, extends to 22kHz, and supports higher power handling than the standard A'Diva.
Does the A'Diva SE require an amplifier?
Yes. It is a passive 4-ohm loudspeaker and requires an amplifier or AV receiver that is compatible with 4-ohm speaker loads.
Is a mount included with the speaker?
Yes. Each speaker includes an Isolation2 surface mount for shelf, desktop, cabinet, or tabletop placement. Wall, in-ceiling, table, and floor-stand mounts are sold separately.
Why Buy From Us
- Authorized Gallo Acoustics Dealer
- 5% Reward Points on Every Purchase
- Price Match Guarantee
- Expert Speaker Placement, Home Theater & Installation Support
